Set Up Scanning (Netware) - Xerox 480 ST System Administration Manual

Set Up Scanning (NetWare)

Xerox Document Centre System Administration Guide
1. Open your Web browser and enter the TCP/IP address of the
Document Centre in the Address or Location field.
2. Click the Properties tab or click Properties in the directory
tree.
3. Select Services, then select Distribution Templates in the
directory tree.
4. Select Repository Setup in the directory tree.
5. Select a repository from the Repository List drop-down list.
6. Select NetWare for Protocols.
7. Type the name of the repository server in Server Name.
8. Type the name of the server volume (NetWare 3.x, 4.x, 5.x
(IPX only)) in Server Volume.
9. Type the context and tree (NetWare 4.x, 5.x (IPX only)) for the
repository in NDS Context and NDS Tree.
10. Type the path for the repository in Directory Path.
11. Type the Login Name and Password for the repository.
Retype the password to verify it in Retype Password.
Page 20 - 19