How To Connect To Ethernet Or Token Ring Networks; Before You Connect To A 100Baset Ethernet Network - Xerox 480 ST System Administration Manual

2. How to Connect to Ethernet or
Token Ring Networks

Before You Connect to a 100BaseT Ethernet Network

Xerox Document Centre System Administration Guide
The Document Centre Ethernet Interface has speed settings of
10Mbps (10 Megabits per second), 100Mbps (100 Megabits per
second) and Auto (AutoSensing). If your network has hubs or
concentrators that have Auto-Sensing enabled, it is possible that if
the Document Centre is set to Auto, the hub/concentrator will not
arbitrate to the correct speed.
Before you connect the printer to your network, perform the
procedure on the next page entitled How to set the Ethernet
Speed.
Page 2 - 1