Set Up Scanning - Netware; Before You Start - Xerox Document Centre 220 Getting Started

2.Set Up Scanning - NetWare

Before You Start

Prior to starting the installation procedure, perform the following
steps:
1. Ensure that the DC220/230/332/340ST is connected,
2. Use the SYSCON utility for NetWare 3.x, or NWADMIN for
3. Create a directory on the file server to be used as a repository for
NOTE Refer to the NetWare documentation for additional information, if
needed.
NOTE The DC 332/340ST supports both PDF and TIFF File Formats.
The PDF image format is a TIFF image enclosed within a PDF
wrapper. The DC220/230ST supports only the TIFF image format.
Companion to Getting Started with Scanning Services
configured, and operating correctly as a printer.
NetWare 4.x to create a user account on the file server for the
scanner.
scanned files. Give the scanner user account all access rights to
this directory, except supervisor. The repository name cannot
exceed 8 characters.
When a document is scanned, the DC220/230/332/340ST logs
into the scanner user account with the user name and password,
transfers the file to the repository in the server, and then logs out.
Page 2 - 1