[Source:]Power:range; [Source:]Power:transient:mode; [Source:]Power:transient:alevel; [Source:]Power:transient:blevel - ITech IT8800 Series Programming Manual

Parameters
DEFault
Unit
*RST Value
Examples
Query Syntax
MAXimum | DEFault ]
Returned Parameters <NR3>
Related Commands

[SOURce:]POWer:RANGe

This command sets the power range of the electronic load module.
Command Syntax
Parameters
DEFault
Unit
*RST Value
Examples
Query Syntax
DEFault ]
Returned Parameters

[SOURce:]POWer:TRANsient:MODE

This command selects the operating mode of the transient generator as follows
in constant current mode.
CONTinuous
after receipt of a trigger.
PULSe
a trigger.
TOGGle
receipt of a trigger.
Command Syntax
Parameters
*RST Value
Examples
Query Syntax
Returned Parameters
Related Commands

[SOURce:]POWer:TRANsient:ALEVel

[SOURce:]POWer:TRANsient:BLEVel

This command specifies the transient level of the input power. The transient
function switches between the level a and level b.
Command Syntax
Parameters
Unit
MINimum through MAX | MINimum | MAXimum |
W (power)
MINinum
POW 5
[SOURce:]POWer[:LEVel][:IMMediate]? [ MINimum |
POW:RANG
[SOURce:] POWer:RANGe <NRf+>
MINimum through MAX | MINimum | MAXimum |
W (power)
MAXimum (high range)
POW:RANG 15
[SOURce:]POWer:RANGe? [ MINimum | MAXimum |
<NR3>
The transient generator puts out a continuous pulse stream
The transient generator puts out a single pulse upon receipt of
The transient generator toggles between two levels upon
[SOURce:] POWer:TRANsient:MODE <mode>
CONTinuous | PULSe | TOGGle
CONTinuous
POW:TRAN:MODE TOGG
[SOURce:] POWer:TRANsient:MODE?
<CRD>
POW:TRAN:ALEV TRAN
[SOURce:] POWer:TRANsient:ALEVel <NRf+>
[SOURce:] POWer:TRANsient:BLEVel <NRf+>
0 through MAX | MINimum | MAXimum | DEFault
W (power)
Copyright © ITECH Electronic Co., Ltd.
POW:LEV 3.5
SOUR:POW:RANGE MIN
Source Subsystem
54