[Source:]Current:slew; [Source:]Current:slew:positive; [Source:]Current:slew:negative - ITech IT8800 Series Programming Manual

*RST Value
Examples
Query Syntax
MAXimum | DEFault ]
Returned Parameters
Related Commands

[SOURce:]CURRent:SLEW

This command sets the slew rate for all programmed changes in the input
current level of the electronic load. This command programs both positive and
negative going slew rates. MAXimum sets the slew to the fastest possible rate.
MINimum sets the slew to the slowest rate.
Command Syntax
Parameters
DEFault
Unit
*RST Value
Examples
Related Commands

[SOURce:]CURRent:SLEW:POSitive

This command sets the slew rate of the current for positive going transitions.
MAXimum sets the slew to the fastest possible rate. MINimum sets the slew to
the slowest rate.
Command Syntax
Parameters
DEFault
Unit
*RST Value
Examples
Query Syntax
MAXimum | DEFault ]
Returned Parameters
Related Commands

[SOURce:]CURRent:SLEW:NEGative

This command sets the slew rate of the current for negative going transitions.
MAXimum sets the slew to the fastest possible rate. MINimum sets the slew to
the slowest rate.
Command Syntax
Parameters
DEFault
Unit
*RST Value
Examples
Query Syntax
MAXimum | DEFault ]
Returned Parameters
Related Commands
MAXimum (high range)
SOUR:CURR:RANGE MIN
[SOURce:]CURRent:RANGe? [ MINimum |
<NR3>
CURR CURR:SLEW
[SOURce:]CURRent:SLEW[:BOTH] <NRf+>
MINimum to MAXimum | MAXimum | MINimum |
A (amps per micro second)
MAXimum
CURR:SLEW MAX
CURR:SLEW:NEG
[SOURce:]CURRent:SLEW:POSitive <NRf+>
MINimum to MAXimum | MAXimum | MINimum |
A (amps per micro second)
MAXimum
CURR:SLEW:POS MAX
[SOURce:]CURRent:SLEW:POSitive? [ MINimum |
<NR3>
CURR:SLEW
[SOURce:]CURRent:SLEW:NEGative <NRf+>
MINimum to MAXimum | MAXimum | MINimum |
A (amps per micro second)
MAXimum
CURR:SLEW:NEG MAX
[SOURce:]CURRent:SLEW:NEGative? [ MINimum |
<NR3>
CURR:SLEW
Copyright © ITECH Electronic Co., Ltd.
Source Subsystem
CURR:SLEW:POS
45