Command Syntax
<mode>
Parameters
*RST Value
Examples
Query Syntax
Returned Parameters
Related Commands
[SOURce:]VOLTage:TRANsient:ALEVel
[SOURce:]VOLTage:TRANsient:BLEVel
This command specifies the transient level of the input voltage. The transient
function switches between the level a and level b.
Command Syntax [SOURce:] VOLTage:TRANsient:ALEVel <NRf+>
Parameters
Unit
*RST Value
Examples
Query Syntax
[ MINimum | MAXimum | DEFault ]
[ MINimum | MAXimum | DEFault ]
Returned Parameters
Related Commands
[SOURce:]VOLTage:TRANsient:AWIDth
[SOURce:]VOLTage:TRANsient:BWIDth
This command specifies the transient pulse width of the input voltage.
Command Syntax [SOURce:] VOLTage:TRANsient:AWIDth <NRf+>
Parameters
Unit
*RST Value
Examples
Query Syntax
[ MINimum | MAXimum | DEFault ]
[ MINimum | MAXimum | DEFault ]
Returned Parameters <NR3>
Related Commands
[SOURce:] VOLTage:TRANsient:MODE
CONTinuous | PULSe | TOGGle
CONTinuous
VOLT:TRAN:MODE TOGG
[SOURce:] VOLTage:TRANsient:MODE?
<CRD>
VOLT:TRAN:ALEV TRAN
[SOURce:] VOLTage:TRANsient:BLEVel <NRf+>
MIN through MAX | MINimum | MAXimum | DEFault
V (volts)
ALEVEL MAXimum , BLEVel MINnum
VOLT:TRAN:ALEV 5 VOLT:TRAN:BLEV 0.5
[SOURce:] VOLTage:TRANsient:ALEVel?
[SOURce:] VOLTage:TRANsient:BLEVel?
<NR3>
VOLT
[SOURce:] VOLTage:TRANsient:BWIDth <NRf+>
50 to 3600 us
S (second)
1000uS
VOLT:TRAN:AWID 0.001 VOLT:TRAN:BLEV 0.02
[SOURce:] VOLTage:TRANsient:AWIDth?
[SOURce:] VOLTage:TRANsient:BWIDth?
VOLT
Copyright © ITECH Electronic Co., Ltd.
Source Subsystem
50