[Source:]Current:transient:mode; [Source:]Current:transient:alevel; [Source:]Current:transient:blevel; [Source:]Current:transient:awidth - ITech IT8800 Series Programming Manual

Returned Parameters
Related Commands

[SOURce:]CURRent:TRANsient:MODE

This command selects the operating mode of the transient generator as follows
in constant current mode.
CONTinuous
after receipt a trigger signal.
PULSe
trigger.
TOGGle
a trigger.
Command Syntax
Parameters
*RST Value
Examples
Query Syntax
Returned Parameters
Related Commands

[SOURce:]CURRent:TRANsient:ALEVel

[SOURce:]CURRent:TRANsient:BLEVel

This command specifies the transient level of the input current. The transient
function switches between the level a and level b.
Command Syntax [SOURce:]CURRent:TRANsient:ALEVel <NRf+>
Parameters
Unit
*RST Value
Examples
Query Syntax
[ MINimum | MAXimum | DEFault ]
[ MINimum | MAXimum | DEFault ]
Returned Parameters
Related Commands

[SOURce:]CURRent:TRANsient:AWIDth

[SOURce:]CURRent:TRANsient:BWIDth

This command specifies the transient pulse width of the input current.
Command Syntax [SOURce:]CURRent:TRANsient:AWIDth <NRf+>
Parameters
Unit
*RST Value
<NR1>
CURR:PROT
The transient generator puts out a continuous pulse stream
The transient generator puts out a single pulse upon receipt of a
The transient generator toggles between two levels upon receipt of
[SOURce:]CURRent:TRANsient:MODE <mode>
CONTinuous | PULSe | TOGGle
CONTinuous
CURR:TRAN:MODE TOGG
[SOURce:]CURRent:TRANsient:MODE?
<CRD>
CURR:TRAN:ALEV
[SOURce:]CURRent:TRANsient:BLEVel <NRf+>
0 through MAX | MINimum | MAXimum | DEFault
A (amperes)
ALEVEL MAXimum , BLEVel MINnum
CURR:TRAN:ALEV 5
[SOURce:]CURRent:TRANsient:ALEVel?
[SOURce:]CURRent:TRANsient:BLEVel?
<NR3>
CURR
[SOURce:]CURRent:TRANsient:BWIDth <NRf+>
20 to 3600 us
S (second)
500uS
Copyright © ITECH Electronic Co., Ltd.
Source Subsystem
CURR:PROT:STAT
TRAN
CURR:TRAN:BLEV 0.5
47