Measure:voltage[:Dc]; Measure:voltage:max; Measure:voltage:min; Measure:current[:Dc] - ITech IT8800 Series Programming Manual

MEASure:VOLTage[:DC]?

This command initiates and executes a new voltage measurement, and returns the
measured input voltage of the electronic load.
Group
Syntax
Returns
Example

MEASure:VOLTage:MAX?

This command initiates and executes a new maximum voltage measurement, and
returns the measured input maximum voltage of the electronic load.
Group
Syntax
Returns
Example

MEASure:VOLTage:MIN?

This command initiates and executes a new minimum voltage measurement, and
returns the measured input minimum voltage of the electronic load.
Group
Syntax
Returns
Example

MEASure:CURRent[:DC]?

This command initiates and executes a new current measurement, and returns the
measured input current of the electronic load.
Measurement
MEASure:VOLTage[:DC]?
<NR2>
MEAS:VOLT?
measured voltage across the electronic load inputs in volts.
Measurement
MEASure:VOLTage:MAX?
<NR2>
MEAS:VOLT:MAX?
would be the measured maximum voltage across the
electronic load inputs in volts.
Measurement
MEASure:VOLTage:MIN?
<NR2>
MEAS:VOLT:MIN?
be the measured minimum voltage across the electronic
load inputs in volts.
Copyright © ITECH Electronic Co., Ltd.
is the measured input voltage in volts.
might return 5.0011, which would be the
is the measured input maximum voltage in volts.
might return 100.0011, which
is the measured input minimum voltage in volts.
might return 1.0011, which would
Measure Commands
34