[SOURce:]VOLTage:HIGH
[SOURce:]VOLTage:LOW
This command sets the high and low level of the current when in constant
voltage mode.
Command Syntax [SOURce:]VOLTage:HIGH <NRf+>
Parameters
DEFault
Unit
*RST Value
Examples
Query Syntax
[MINimum|MAXimum|DEFault ]
[MINimum|MAXimum|DEFault ]
Returned Parameters <NR3>
[SOURce:]RESistance
This command sets the resistance of the load when operating in constant
resistance mode.
Command Syntax [SOURce:]RESistance[:LEVel][:IMMediate] <NRf+>
Parameters
DEFault
Unit
*RST Value
Examples
Query Syntax
[ MINimum | MAXimum | DEFault ]
Returned Parameters
Related Commands
[SOURce:]RESistance:RANGe
This command sets the resistance range of the electronic load module.
Command Syntax [SOURce:]RESistance:RANGe <NRf+>
Parameters
DEFault
Unit
*RST Value
Examples
Query Syntax
MAXimum | DEFault ]
Returned Parameters
[SOURce:]RESistance:TRANsient:MODE
This command selects the operating mode of the transient generator as follows
in constant resistance mode.
[SOURce:]VOLTage:LOW <NRf+>
MINimum through MAX | MINimum | MAXimum |
A (amps)
MAXimum
VOLT:HIGH 5
[SOURce:]VOLTage:HIGH?
[SOURce:]VOLTage:LOW?
MINimum through MAX | MINimum | MAXimum |
MAXimum
RES 5 RES:LEV 3.5
[SOURce:]RESistance[:LEVel][:IMMediate]?
<NR3>
RES:RANG
MINimum through MAX | MINimum | MAXimum |
MAXimum (high range)
RES:RANG 15
[SOURce:]RESistance:RANGe? [ MINimum |
<NR3>
Copyright © ITECH Electronic Co., Ltd.
Source Subsystem
SOUR:RES:RANGE MIN
51