System:clear; System:local; System:remote; System:rwlock - ITech IT8800 Series Programming Manual

Returned Parameters
Examples

SYSTem:CLEar

This action is used to clear the error sequence information.
Command Syntax
Parameters
Examples
Related Commands

SYSTem:LOCal

The command sets the load to local mode when in RS232 mode. Can
use the buttons on front panel to operate.
Command Syntax
Parameters
Examples
Related Commands

SYSTem:REMote

The command sets the load to remote mode when in RS232 mode. All
the buttons except for the LOCAL button will lose function. In the remote
state, press LOCAL key return to local mode.
Command Syntax
Parameters
Examples
Related Commands

SYSTem:RWLock

This command can set the load to remote mode, all the button on front panel
will lose function including LOCAL button. Use
local mode.
Command Syntax
Parameters
Examples
Related Commands

SYSTem:KEY

This command is used to simulate the key pressing.
Command Syntax
Parameters
<NR1>, <SRD>
SYST:ERR?
SYSTem:CLEar
None
SYST:CLE
SYST:ERR?
SYSTem:LOCal
None
SYST:LOC
SYST:REM
SYSTem:REMote
None
SYST:REM
SYST:LOC
SYSTem:RWLock
None
SYST:RWL
SYST:REM
SYSTem:KEY <NR1>
0 to 255
Copyright © ITECH Electronic Co., Ltd.
System Commands
SYST:RWL
SYST:RWL
SYSTem:LOCal return to
SYST:LOC
29