Mitsubishi Electric 800 Series Instruction Manual page 29

 Reinstallation of the front cover
• Example of FR-E820-0008(0.1K)
(a)
Rear of the cover Rear of the cover Rear of the cover
Hooks Hooks Hooks
(a)
Check the position of the hooks on the rear of the cover.
(b) Insert the hooks of the cover into the sockets of the wiring cover, and reinstall the cover to the inverter.
(c)
Tighten the mounting screw of the front cover. (Tightening torque: 0.6 to 0.8 N·m)
NOTE
• Fully make sure that the front cover has been reinstalled securely. Always tighten the installation screws of the front cover.
28
2. Installation and Wiring
2.2 Removal and reinstallation of the front cover
(b)
(c)
Hooks Hooks Hooks
本体
Sockets of the wiring cover Sockets of the wiring cover Sockets of the wiring cover
Fasten Fasten Fasten