Mitsubishi Electric 800 Series Instruction Manual page 31

 Removal of the wiring cover
• FR-E820-0050(0.75K) or lower and FR-E820S-0030(0.4K) or lower
Pull out the cover along the guides in the direction shown by the arrow in the figure above.
• FR-E820-0080(1.5K) to FR-E820-0175(3.7K), FR-E840-0016(0.4K) to FR-E840-0095(3.7K), and FR-E820S-0050(0.75K)
or higher
(a)
Screwdriver Screwdriver Screwdriver
(a)
Insert a tool such as a flathead screwdriver into the half-hole above the "PUSH" mark on the wiring cover to push the stopper behind the
wiring cover approx. 3 mm.
(b)
Pull out the cover along the guides in the direction shown by the arrow in the figure above.
• FR-E820-0240(5.5K) or higher
Pull out the cover along the guides in the direction shown by the arrow in the figure above.
30
2. Installation and Wiring
2.2 Removal and reinstallation of the front cover
Hooks Hooks Hooks
(b)
Guides
Wiring cover
Guides Guides Guides
Guides Guides Guides