Mitsubishi Electric 800 Series Instruction Manual page 116

 400 V class
Motor model: SF-V5RUH[]K
Applicable inverter model:
FR-E840-[]K (ND rating)
Rated output power (kW)
Rated current (A)
Rated torque (N·m)
Maximum torque at 150% 60 s
(N·m)
Rated speed (r/min)
Maximum speed (r/min)
Frame No.
-4 2
Inertia moment J (×10 kg·m )
*4
Noise
Voltage
Cooling fan
(with
thermal
*2
Input
*6*
protector)
Recommended
7
thermal setting
Surrounding air temperature and
humidity
Structure (Protection rating)
Detector
Equipment
Insulation class
Vibration rank
Approx. mass (kg)
*1 The maximum speed of a 3.7 kW motor or less is 3600 r/min. Consult our sales office for use of these motor.
*2 Power (current) at 50/60 Hz.
*3 Since a brake motor has a window for gap check, the protection rating of both the cooling fan section and brake section of the motor is IP20. The
letter S in IP23S is an additional code indicating that a cooling fan was checked for water protection while it is stationary.
*4 The value shown is applicable to the motor at high carrier frequency (Pr.72 = 6 and Pr.240 = 0).
*5 The 12/24 V power supply is required for the encoder.
*6 The cooling fan is equipped with a thermal protector. The cooling fan stops when the coil temperature equals or exceeds the specified value in
order to protect the fan motor. A restrained cooling fan or degraded fan motor insulation could be causes for the rise in coil temperature. The
cooling fan re-starts when the coil temperature drops to normal.
*7 The cooling fan voltage and input values are the basic specifications of the cooling fan alone and free air values. The input value becomes slightly
larger when it is rotated by this motor due to an increased workload, but the cooling fan can be used as it is. When preparing a thermal relay at
the user side, use the recommended thermal setting.
 Motor torque (SF-V5RU)
The torque characteristics of the SF-V5RU series driven by the inverter are shown in graph form as follows.
These are the case of the motor driven by the inverter at ND rating. The overload capacity decreases for the LD rating. Observe
the specified range of the inverter.
SF-V5RU (1500 r/min series)
1.5 to 5.5 (kW)
Maximum torque for short time
150
Continuous
operation torque
100
75
(%)
50
0
1500
Speed (r/min)
• The maximum speed of a 3.7 kW motor or less is 3600 r/min. Consult our sales office for use of these motor.
• The maximum speed of a brake motor is 1800 r/min.
1 2
2.2 2.2
1.5 2.2
4.2 5.8
9.55 14.1
14.3 21.1
1500
*1
3000
90L 100L
67.5 105
75 dB or less
Single-phase 200 V 50 Hz /
Single-phase 200 to 230 V 60 Hz
36/55 W
(0.26/0.32 A)
0.36 A
-10 to +40°C (non-freezing),
90% RH or less (non-condensing)
Totally enclosed forced ventilated (Motor: IP44, Cooling fan:
*3
IP23S)
Encoder: 2048 pulses/rev, Phases A, B, and Z output, 12/24
VDC power supply
Encoder, thermal protector, fan
F
V10
24 33
Constant power
3000
3 5
3.7 7.5
3.7 5.5
8.8 14.5
23.6 35.0
35.4 52.4
112M 132S
175 275
22/28 W
(0.11/0.13 A)
0.18 A
*5
41 52
1
2
3
4
5
6
7
8
9
10
115
4. Specifications
4.2 Motor rating