Mitsubishi Electric 800 Series Instruction Manual page 17

*1 Refer to the FR-E800 Instruction Manual (Function).
*2 Refer to the FR-E800 Instruction Manual (Maintenance).
 Ethernet model
Component names are as follows.
(j)
Symbol
Plug-in option connection
(a)
connector
(b) Control logic switch
(c) Voltage/current input switch
(d) Ethernet connector (2 ports)
(e) Operation panel
(f) USB mini B connector
(g) Control circuit terminal block
(h) Main circuit terminal block
(i) Comb-shaped wiring cover
(j) Front cover
(k) Cooling fan
(l) Earth plate
*1 Refer to the FR-E800 Instruction Manual (Function).
16
1. Introduction
1.2 Component names
(e)
(f)
(g)
Name
Connects a plug-in option or a communication option.
Select the sink logic (SINK) or the source logic (SOURCE).
Select voltage or current for the input via terminals 2 and 4.
Connector for the Ethernet dedicated cable for connection to the network.
Operates and monitors the inverter. The operation panel cannot be
removed from the inverter.
Connector for a personal computer. Enables communication with FR
Configurator2.
Connects cables for the control circuit.
Connects cables for the main circuit.
This cover is removable without unplugging cables.
Remove this cover for wiring.
Cools the inverter (FR-E820-0080(1.5K) or higher, FR-E840-0040(1.5K) or
higher, and FR-E820S-0080(1.5K) or higher)
Connects the option and the inverter for earthing (grounding).
(k)
(h)
(i)
Description
(a)
(b)
(c)
(d)
(l)
Refer to page
Instruction Manual
of each option
60
*1
78
*1
80
53
45
27
27
*2
Instruction Manual
of each option