Mitsubishi Electric 800 Series Instruction Manual page 102

NOTE
• Before wiring or inspection for a PM motor, confirm that the PM motor is stopped. In an application, such as fan and blower,
where the motor is driven by the load, a low-voltage manual contactor must be connected at the inverter's output side, and
wiring and inspection must be performed while the contactor is open. Otherwise you may get an electric shock.
• Do not open or close the contactor while the inverter is running (outputting).
3. Precautions for Use of the Inverter
3.4 Power shutdown and magnetic contactor (MC)
1
2
3
4
5
6
7
8
9
10
101