ABB ACS6080 User Manual page 120

Procedure:
1. Assemble the roof attachment.
2. Tighten the bolts firmly.
3. To fix the drive to the ceiling or the back wall, use two suitable struts
per roof attachment.
The struts are not supplied.
WARNING! Do not install the struts at a 90° angle to the cabinet roof
(Fig. 5-24).
4. If you fix the drive to the ceiling, use two struts per roof attachment
(1 in Fig. 5-24).
5. If you fix the drive to the back wall, install one strut in a 90° angle to
the drive (2 in Fig. 5-24).
~45°
(1) Two struts at 45° to ceiling
(2) One strut at 90° to wall
3BHS842007 E01 REV C
1
~45°
Figure 5-24 Recommended ceiling and wall fixings
2
~90°
(3) Do not install the struts at a 90°
angle to the cabinet roof
ACS6080 USER MANUAL
05 MECHANICAL INSTALLATION
3
120/238