ABB ACS6080 User Manual page 214

3. Remove the bolts (4) on each side of the phase module.
3
(1) 1/2"
(2) 80 mm
4. Place the lifting table in front of the phase module.
5. Adjust the height of the table so that it is level with the rails on the
underside of the phase module.
6. Pull the phase module onto the table.
CAUTIONA phase module weighs approximately 190 kg. When pulling
out the phase module, make sure that the disconnected water hoses,
optical fibers and power supply leads are out of the way.
3BHS842007 E01 REV C
1
2
4 4
Figure 9-22 Phase module removal
ACS6080 USER MANUAL
09 PREVENTIVE AND CORRECTIVE MAINTENANCE
(3) 17 mm
(4) Location of bolts to remove
4 4
214/238