ABB ACS6080 User Manual page 116

Figure 5-19 Tools required to fasten the pressure relief vent to the roof
(1) Cordless drill
(2) Torx bit
Procedure
1. Orientate the pressure relief vents with the baffle blades (arrows)
pointing to the center of the drive.
Note: The orientation of the baffle blades can be seen through the grille on
the underside.
(1) Orientation of baffle blades
(2) Center of drive
2. Fasten the pressure relief vent to the roof with the supplied
screws (Fig. 5-20).
3BHS842007 E01 REV C
1
2
3
1
3
Figure 5-20 Installation example of pressure relief vents
ACS6080 USER MANUAL
05 MECHANICAL INSTALLATION
(3) 24 x M6x20 Self-tapping
(HAQN40105P0260)
2
1
3
(3) Pressure relief vents
116/238