09 PREVENTIVE AND CORRECTIVE MAINTENANCE
3. Unscrew the circuit board mounting bracket (1, 2 and 3).
1
3
2
4. Take out the circuit board mounting bracket and place it on the heat
exchanger housing.
5. Disconnect the ground wire (1), cut off the cable tie (2), unplug the
plug-in connectors (arrows), and unscrew the screws (3, 4, 5 and 6)
fixing the fan mounting bracket to the housing.
3
4
1
2
6
5
3BHS842007 E01 REV C
ACS6080 USER MANUAL
228/238