Recycling And Disposal; Battery Maintenance; Figure 7-1. Monitoring System Cleaning - Covidien Nellcor Operator's Manual

Preventive Maintenance
For sensors, follow cleaning instructions in the instructions for use shipped with those components.
Before attempting to clean a Nellcor™ pulse oximetry sensor, read the Instructions for Use enclosed
with the sensor. Each sensor model has cleaning instructions specific to that sensor. Follow the
pulse oximetry sensor cleaning and disinfecting procedures in the particular sensor's Instructions for
Use.
Avoid spilling liquid on the monitoring system, especially in connector areas, but if a spill occurs,
clean and thoroughly dry the monitoring system before reuse. If in doubt about monitoring system
safety, refer the monitoring system to a qualified service technician for examination.

Recycling and Disposal

7.3
When the monitoring system, battery, or accessories reach the end of useful life, recycle or dispose
of the equipment according to appropriate local and regional regulations.

Battery Maintenance

7.4

Note:
Use the monitoring system's battery indicator as a guide to the amount of battery power remaining. Reference
Figure 2-2 on page 2-4.

Note:
Remove the battery if anticipating long periods of time between use or if storing the monitoring system.
7-2
Figure 7-1. Monitoring System Cleaning
Operator's Manual