Save A Spot Reading; Alarms And Alarm Limits Management; Alarm Indicators; Figure 4-4. Save Spot Reading - Covidien Nellcor Operator's Manual

Save a Spot Reading

4.4.2
The Save Spot Reading function saves a point in time of the patient's data.
To save a spot reading
Press the Menu button.
1.
If it is not already selected, scroll to Save Spot Reading.
2.
Press the OK button to select this item.
3.
The message "Spot Reading Saved" appears.
Reference
4.

Alarms and Alarm Limits Management

4.5

Alarm Indicators

4.5.1
The monitoring system enters an alarm state when a condition occurs that requires user attention.
Reference Troubleshooting
As described in Table
tors to identify high-priority, medium-priority, and low-priority alarms. High priority alarms take pre-
cedence over medium- and low-priority alarms.
Visual alarms appear on the screen in order of highest priority, regardless of any audible alarm status.
Sensor Disconnect, Sensor Off, and Sensor Failure alarms, which by default are low-priority alarms,
can be set as medium- or high-priority alarms in the Service menu (pass code required).
Operator's Manual
Monitoring History on page
on page 8-1.
4-2 on page 4-8, the monitoring system uses both visual and audible indica-
Figure 4-4. Save Spot Reading
5-1 to view the saved spot readings.
Alarms and Alarm Limits Management
4-7