Champion E Series Installation/Operation With Service Replacement Parts page 10

Installation
Table Connections
The dishwasher and dish tables must be in their final locations and level before connection. The
recommended table height is 34"/864mm.
1. Slope the load end dish table away from the entrance of the dishwasher to prevent water
from flowing into the dishwasher.
2. Slope the unload end dish table toward from the exit of the dishwasher so that water
flows back into the dishwasher.
3. The dish table flanges should be bolted and sealed to the ends of the dishwasher using a
food-grade silicon sealant as shown in the table connection detail illustration below.
2
Dishwasher
Table connection detail
L-R Direction Shown
Typical table installation
Table
Flange
Silicon
Sealant
See the table
connection detail above
Standard Table
Height
34"