E-Rack Digital Temperature Display Meters (Operation And Calibration) - Champion E Series Installation/Operation With Service Replacement Parts

Digital Display
E-Rack Digital Temperature Display Meters
! ATTENTION !
The Digital Temperature Displays only indicate temperature, they do not control wash tank or final rinse
booster heaters. Electromechanical thermostats continue to control the tank and final rinse heat
circuits.
1. The analog temperature gauges have been replaced with digital temperature display meters.
2. The meters display temperatures for the prewash tank (if equipped), the wash tank,
power rinse tank (if equipped), the dual rinse (DR) tank (if equipped), and the final rinse.
3. A meter displays temperature in 2 ways:
a. The first display is a semi-circular LED bar that moves from left to right as the temperature
increases in magnitude. The color of the bar changes from black, to orange, and to green.
b. The second display is a 3 digit LED that changes from OFF if the tank or final rinse heat is
disabled, to Blank and from a minimum temperature of 70
temperature set point of the meter.
(Refer to the "Display Meter Operation Checks" on the next page to change a Meter set-point.)
Control cabinet showing digital temperature display meters on the right-hand side of the control cabinet.
LED Bar
Close-up view of the display meters. Note the semi-circular indicator bars
26
3 digit
LED
and the numeric readouts in the center.
o
F to the maximum calibrated