Table of Contents
Advertisement
Servicing and troubleshooting
12.4.
About reactivating EasyOne Air after storage
12.5.
Exporting logging information
Operator's Manual V03 • EasyOne Air • EasyOne Connect
© ndd Medizintechnik AG • Technoparkstrasse 1, 8005 Zurich, Switzerland • www.ndd.ch
After storing EasyOne Air for longer than approximately 8 hours without the
battery, you must reactivate EasyOne Air.
Make sure that EasyOne Air has been stored under the specified storage
conditions. If EasyOne Air has not been stored under correct conditions, or if
you cannot verify the conditions, do not proceed. Contact your
EasyOne distribution partner or the ndd Servicing Department.
To reactivate EasyOne Air, you must setup EasyOne Air like you did for the
first-time setup.
List of specifications for EasyOne Air 8 9
About charging the battery of EasyOne Air 8 6
Setting up the EasyOne Air spirometer 2 3
Checking for correct operation of EasyOne Air 8 6
Contact information 4
EasyOne Connect can export logging information. The ndd Servicing
Department or your own technical staff may require logging information to
determine the source of a problem.
1 Choose
Utilities > Export
2 Select
Logging Information
3 Choose Export.
4 Select a location in your file system where you to save the log file, for
example, a USB flash drive.
5 Choose OK.
A confirmation is displayed when the export has been successful.
Contact information 4
Data.
and deselect all other check boxes.
9000007/03
88
88/105
Hide quick links:
Advertisement
Table of Contents
