Assessing Tests Retrospectively With Easyone Connect - NDD EasyOne Air Operator's Manual

Working with patient data and reports
9.2.4.

Assessing tests retrospectively with EasyOne Connect

Operator's Manual V03 • EasyOne Air • EasyOne Connect
© ndd Medizintechnik AG • Technoparkstrasse 1, 8005 Zurich, Switzerland • www.ndd.ch
Retrospectively, you can manually override the acceptability of trials and the
ranking of trials. This means that you can mark trials that the system judged
acceptable as unacceptable and vice versa. Also, you can change the trial
ranking (rank 1, 2, 3, and so forth).
1 From any result screen in the parameter table, choose the
for the particular trial.
 An overlay window is displayed.
2 To mark the selected trial as acceptable or unacceptable, select or deselect
the Acceptable check-box.
 If you have not activated user handling, the login window is displayed.
 If you have activated user handling, the test comment window is
displayed. In this case, proceed with step 4.
3 If the login window is displayed, enter your user ID.
 The selected trial is marked as either acceptable or unacceptable.
4 To change the ranking, choose
 You can only set the rank to 1 (highest). To set the rank of other trials to
2, 3, and so forth, you must subsequently set the rank to 1 for all trials.
The last trial that you set to rank 1 is rank 1. The second last trial that
you set to rank 1 is rank 2, and so forth.
5 To close the overlay window, choose ×.
 About user handling and the default password of EasyOne Connect  8 2
Highest Ranked.
Trial Rank field
9000007/03
71
71/105