Working With Patient Data And Reports In Easyone Connect; Merging Two Patient Data Records With Easyone Connect - NDD EasyOne Air Operator's Manual

Working with patient data and reports
9.2.

Working with patient data and reports in EasyOne Connect

9.2.1.

Merging two patient data records with EasyOne Connect

Operator's Manual V03 • EasyOne Air • EasyOne Connect
© ndd Medizintechnik AG • Technoparkstrasse 1, 8005 Zurich, Switzerland • www.ndd.ch
CAUTION
FALSE DIAGNOSIS
The predicted values and the system interpretation are based on the patient
demographic data. Therefore, wrong patient data can cause false results.
Enter patient data meticulously.
Double-check that you have entered the patient data correctly.
If, for example, two data records of the same patient were acquired with
different tests or if different spellings of a patient's name exist, you can merge
these two data records into one.
Prerequisite
The two data records must have an identical date of birth.

1 Choose Patients.
2 Select one of the two data records.
3 Drag and drop that data record onto the second data record by doing the
following:
a) Right-click the first data record and keep the mouse button pressed.
b) Move the data record across the screen onto the second data record.
c) While the first data record is above the second, release the mouse
button.
 If the dates of birth of the two data records match, a confirmation
window is displayed.
 If the dates of birth of the two data records do not match, a warning is
displayed. In this case, you cannot merge these two data records.
4 To finish, confirm the message.
9000007/03
71
68/105