NDD EasyOne Air Operator's Manual page 49

Performing spirometry
Operator's Manual V03 • EasyOne Air • EasyOne Connect
© ndd Medizintechnik AG • Technoparkstrasse 1, 8005 Zurich, Switzerland • www.ndd.ch
4 To set the baseline, seal off one end of the EasyOne FlowTube with the
wrapper to avoid air flow.
5 Choose OK.
 The Please wait...
 After the baseline has been set, a signal sounds, and the
message is displayed.
6 Remove the wrapper from the EasyOne FlowTube.
7 If you want to perform an FVL test, an MVV test, or an SVC test, attach the
nose clip to the patient's nose.
8 Hand EasyOne Air to the patient.
9 Tell the patient to breathe at rest.
 The following procedure To perform the FVC breathing maneuver
represents the breathing maneuver for the FVC test as an example. If
you want to perform any other test, replace the procedure To perform
the FVC breathing maneuver with the breathing maneuver for the
required test.
Breathing maneuvers for all available tests  5 8
message is displayed while the baseline is set.
BLAST OUT...
9000007/03
57
49/105