About The Trend View With Easyone Connect - NDD EasyOne Air Operator's Manual

Working with patient data and reports
9.2.3.

About the trend view with EasyOne Connect

Operator's Manual V03 • EasyOne Air • EasyOne Connect
© ndd Medizintechnik AG • Technoparkstrasse 1, 8005 Zurich, Switzerland • www.ndd.ch
 To create and send a new patient record from
EasyOne Connect to EasyOne Air
1 In EasyOne Connect, choose Patients.
2 Choose New.
3 CAUTION! False diagnosis: The predicted values and the system
interpretation are based on the patient demographic data. Therefore,
wrong patient data can cause false results. Enter patient data
meticulously. Double-check that you have entered the patient data
correctly.
Fill out those fields that are marked with an asterisk (*).
 You cannot complete adding patient data without filling out these
fields.
4 In all other fields, enter additional patient data if necessary.
5 Choose OK.
6 Select the patient record that you just have created.
7 Choose > EasyOne.
 The selected patient record is send to EasyOne Air.
 EasyOne Connect displays a message whether the sending has been
successful.
 You can remove EasyOne Air from the cradle, or you can repeat steps 2
to 7 to create and send additional patient records.
 About connectivity and data exchange  3 6
The trend view visualizes an increase or a decline of individual parameters.
This view facilitates the comparison of different measurements over time.
From the history screen (Patients > select patient >
The trend screen displays two curves, one for the absolute values and one for
the percentage of predicted normal values.
At the bottom of the trend screen, you can select four parameters to be
displayed at the same time.
History), choose Trend.
9000007/03
70/105
71