NDD EasyOne Air Operator's Manual page 21

First-time setup
Operator's Manual V03 • EasyOne Air • EasyOne Connect
© ndd Medizintechnik AG • Technoparkstrasse 1, 8005 Zurich, Switzerland • www.ndd.ch
3 Close and lock the battery compartment by turning the lock screw
counterclockwise.
4 If you want to connect the cradle to a printer, do the following:
a) Connect the smaller plug of the USB cable micro to type B to the left USB
port of the cradle (marked with the printer/PC icon).
b) Connect the larger plug of the USB cable micro to type B to the
corresponding USB port of your printer.
5 If you want to connect the cradle to a PC, do the following:
a) Connect the smaller plug of the USB cable micro to type A to the left USB
port of the cradle (marked with the printer/PC icon).
b) Connect the larger plug of the USB cable micro to type A to a USB port of
your PC.
 You can connect the cradle either to a PC or to a printer. If you connect
the cradle to a PC, you can use EasyOne Connect to print.
9000007/03
24
21/105