Electromagnetic Emission - NDD EasyOne Air Operator's Manual

Appendix
A.2.5.

Electromagnetic emission

Emissions test
RF emissions
CISPR 11
RF emissions
CISPR 11
Harmonic emissions
IEC 61000-3-2
Voltage fluctuations/
flicker emissions
IEC 61000-3-3
 Emission table for IEC 60601-1-2 3
Operator's Manual V03 • EasyOne Air • EasyOne Connect
© ndd Medizintechnik AG • Technoparkstrasse 1, 8005 Zurich, Switzerland • www.ndd.ch
Guidance and manufacturer's declaration – electromagnetic
emissions
EasyOne Air is intended for use in the electromagnetic environment specified
below. The user of EasyOne Air should assure that it is used in such an
environment.
Compliance Electromagnetic environment – guidance
Group 1 EasyOne Air uses RF energy for its internal function. Additionally,
the EUT contains a Radio Bluetooth and BLE module, which
complies with the national regulations. Therefore, its RF emissions
are very low and are not likely to cause any interference in nearby
electronic equipment. However, a separation distance of 30 cm
shall be maintained.
Class B EasyOne Air is suitable for use in all establishments, including
domestic establishments and those directly connected to the
public low-voltage power supply network that supplies buildings
Class A
used for domestic purposes.
Complies
rd th
and 4 edition
9000007/03
105
102/105