Overview Of Features Of The Easyone Connect Software; List Of Terms And Definitions - NDD EasyOne Air Operator's Manual

Introduction
4.2.

Overview of features of the EasyOne Connect software

4.3.

List of terms and definitions

Term Definition
test Short for spirometry test.
A test is an examination that is defined by the breathing maneuver that the patient performs and by
the parameters that are calculated from the measured data.
For each test, a report exists.
trial The performing of one breathing maneuver.
A trial is part of a test.
parameter For each trial, parameters are calculated from its curve.
post Short for post bronchodilator.
A post is performed after the patient is treated with a bronchodilator. Prior to the medication, the
same test has been performed to be compared with the post.
 Terms and definitions
Operator's Manual V03 • EasyOne Air • EasyOne Connect
© ndd Medizintechnik AG • Technoparkstrasse 1, 8005 Zurich, Switzerland • www.ndd.ch
EasyOne Connect offers the same features as EasyOne Air to perform
spirometry, to work with patient data, or to evaluate results, as well as some
additional features.
EasyOne Connect is especially helpful to work with patient data and to
evaluate results because you can use a full-size PC monitor and keyboard.
If you want to perform spirometry with EasyOne Air stand-alone, for example
off-site, EasyOne Connect enables you to enter all relevant patient data
beforehand and synchronize that data to EasyOne Air. Then, after you return
from performing spirometry, you can synchronize the test results back to
EasyOne Connect and evaluate the test results, print reports, and archive the
data on your PC.
To work efficiently with patient data and orders for spirometry tests, you can
link up EasyOne Connect with your EMR system.
 About connectivity and data exchange  3 6
9000007/03
36
31/105