Table of Contents
Advertisement
Working with patient data and reports
10.2.7
About the trend view with EasyOne Connect
10.2.8
Assessing tests retrospectively and entering comments with
EasyOne Connect
Operator's Manual V1.1 • EasyOne Air • EasyOne Connect
© ndd Medizintechnik AG • Technoparkstrasse 1, 8005 Zurich, Switzerland • www.ndd.ch
The trend view visualizes an increase or a decline of individual parameters.
This view facilitates the comparison of different measurements over time.
From the history screen
(Patients > select patient >
The trend screen displays two curves, one for the absolute values and one for
the percentage of predicted normal values.
At the bottom of the trend screen, you can select four parameters to be
displayed at the same time.
Retrospectively, you can manually override the acceptability of trials and the
ranking of trials. This means that you can mark trials that the system judged
acceptable as unacceptable and vice versa. Also, you can change the trial
ranking (rank 1, 2, 3, and so forth).
To assess tests retrospectively
1 From any result screen in the parameter table, choose the
for the particular trial.
An overlay window is displayed.
2 To mark the selected trial as acceptable or unacceptable, select or deselect
the
Acceptable
check-box.
If you have not activated user handling, the login window is displayed.
If you have activated user handling, the test comment window is
displayed. In this case, proceed with step 4.
3 If the login window is displayed, enter your user ID.
The selected trial is marked as either acceptable or unacceptable.
4 To change the ranking, choose
You can only set the rank to 1 (highest). To set the rank of other trials to
2, 3, and so forth, you must subsequently set the rank to 1 for all trials. The
last trial that you set to rank 1 is rank 1. The second last trial that you set to
rank 1 is rank 2, and so forth.
5 To close the overlay window, choose ×.
History), choose Trend.
Highest
Ranked.
Trial Rank
field
92
90/144
Advertisement
Table of Contents
