Detergent Probe/Signal For Chemical Dispensing Systems By Others - Champion DH6000T-VHR Installation Manual

Installation
Detergent Probe and Injection Point for Chemical
Dispensing System by others.
WASH TANK CAPACITY: 10 US GAL/8.3 IMP. GAL/38 L
DET
TWO 7/8" DIAMETER HOLES AT LOWER RIGHT REAR
CORNER OF TANK.
- TOP HOLE IS DETERGENT INJECTION
- BOTTOM HOLE IS DETERGENT PROBE.
SIGNAL ENABLED DURING WASH CYCLE.
Detergent Signal for Chemical Dispensing System by
others.
120VAC FUSE BLOCK-1.5 AMP-
MAX LOAD DETERGENT SIGNAL
CONNECTION. LOCATED ON FRONT
BASE.
SIGNAL ENABLED DURING WASH CYCLE.
18
INJECTION POINT
PROBE
Fig. 21
LINE
DETERGENT
POWER
COMMON
120VAC
120VAC
NEUTRAL
1.5 AMP
1.5 A
MAX.
MAX.
Fig. 22
RINSE AID
120VAC
1.5 AMP
MAX.