Table of Contents
Advertisement
Operation, Cleaning, and Maintenance Guide
DH6000
LISTED
3765 Champion Boulevard
Winston-Salem, NC 27105
(336) 661-1556 Fax: (336) 661-1660
Toll-free: 1 (800) 858-4477
Models:
DH6000
Hot water sanitizing machine
w/fresh water rinse and built-in
stainless steel electric booster
DH6000-VHR
Hot water sanitizing machine w/fresh
water rinse and built-in stainless steel
electric booster/Ventless Heat Recovery
Issue Date: 9.5.19
Manual P/N
For machines beginning with S/N D190217104 and above
2674 N. Service Road, Jordan Station
Ontario, Canada L0R 1S0
(905) 562-4195 Fax: (905) 562-4618
Toll-free: 1( 800) 263-5798
115256 rev. A
Printed in the USA
Advertisement
Table of Contents
Related Manuals for Champion DH6000
Summary of Contents for Champion DH6000
- Page 1 Issue Date: 9.5.19 Manual P/N LISTED 115256 rev. A For machines beginning with S/N D190217104 and above 3765 Champion Boulevard 2674 N. Service Road, Jordan Station Printed in the USA Winston-Salem, NC 27105 Ontario, Canada L0R 1S0 (336) 661-1556 Fax: (336) 661-1660...
- Page 2 National Service Department In Canada: In the USA: Toll-free: (800) 263-5798 Toll-free: (800) 858-4477 Tel: (905) 562-4195 Tel: (336) 661-1556 Fax: (905) 562-4618 Fax: (336) 661-1660 email: service@moyerdiebellimited.com email: service@championindustries.com ATTENTION The model no., serial no., voltage, Hz and phase are needed to identify your machine and to answer questions.
- Page 3 Product Registration Three ways to REGISTER YOUR PRODUCT and ACTIVATE YOUR WARRANTY. 4:34 PM • Use your mobile device and connect to the website www.championindustries.com to register your product. • Scan the QR code http://champDW.us located on the front of the panel of the machine.
- Page 4 Product Registration PRODUCT REGISTRATION BY FAX COMPLETE THIS FORM AND FAX TO: (336) 661-1660 in the USA 1-(800) 204-0109 in Canada PRODUCT REGISTRATION CARD Model Serial # Date of Installation: Company Name: Address: (Street) State/Province Zip/Postal Code Telephone #: ( Contact: Installation Company: Address:...
- Page 5 Revision History Specifications are subject to change based on continual product improvement. Revision History Revision Revised Serial Number Revision Date Pages Effectivity Description 8.5.19 D190217104 Released first edition. 9.5.19 D190818180 Added cycle counter to the program.
-
Page 6: Limited Warranty
(b) 90 days after installation, whichever occurs first. In the event that The Company elects to repair, the labor and work to be performed in connection with the warranty shall be done during regular working hours by a Champion authorized service technician. -
Page 7: Table Of Contents
Table of Contents Table of Contents Revision History ..........................i Limited Warranty ........................... ii Specification Sheets ........................vi Safety Symbols - User Manual Display ..................viii Operation .....................1 Machine Assembly ....................1 Detergent Requirement ..................2 Recommended Water Hardness .................2 Loading Wares ....................2 Machine Controls ....................3 Cycle Times ......................4 Operation Sequence ...................5 Changing Cycle Times ..................7... -
Page 8: Specification Sheets
: Door Interlock – locks door closed during the vent fan cycle SPECIFIER STATEMENT : Racks Specified unit will be Champion model DH-6000 high : Peg temperature hood-type dish-washing machine. Features : Flat HMI controls, Rinse Sentry, Auto start, up to 60 racks/hour, : Corner Operation splash baffle 0.73 US gals/rack [2.76 liters/rack, 0.61 imp. - Page 9 Due to an ongoing value analysis program at [853] Voltage Amps Ampacity Protective Device 19-1/2" 8-9/16" [91] Detergent Time cycles in seconds Champion, specifications contained in this catalog [496] [217] 208-240/60/1 39-34 Probe 4-7/16" are subject to change without notice. Wash [112] 6-1/4" 7/8" Dia 11-5/16"...
- Page 10 : Drain Water Tempering Kit (unmounted) SPECIFIER STATEMENT : Racks : Peg Specified unit will be Champion model DH6000 with : Flat Ventless Heat-Recovery and Condensate Removal, high : Corner operation splash baffle temperature hood-type dishwashing machine. Features...
- Page 11 [217] Time cycles in seconds Due to an ongoing value analysis program at Voltage Amps Ampacity Protective Device 6-1/4" 19-1/2" Champion, specifications contained in this catalog [159] 4-11/16" 11-5/16" Wash 208-240/60/1 39-34 [496] [119] [288] are subject to change without notice.
-
Page 12: Safety Symbols - User Manual Display
Safety Symbols - User Manual Display Safety Symbols The following symbols are used throughout this manual to alert the reader to important information. WARNING: Warning statements indicate a condition or practice extremely important to the health of the operator or the operation of the machine. CAUTION: Caution statements indicate a condition or practice that may result in damage to the machine. -
Page 13: Operation
Operation Machine Assembly To Assemble the dishwasher: • Install the pump strainer. • Install the scrap screens and screen spacer. • Install the upper and lower wash and rinse spray arms. The arms are interchangeable. • Make sure the arms spin freely. SCRAP SCREENS X 2 PUMP STRAINER Fig. -
Page 14: Detergent Requirement
Operation Detergent Requirement Use a commercial grade NON-CHLORINATED detergent in this dishwasher. Consult the chemical supplier for the rinse-aid requirements. Recommended Water Hardness • A water supply with a water hardness of 3 grains/US Gal - 0.83 Imp. Gal - 5/3mg/L or less is highly recommended. -
Page 15: Machine Controls
Status window shows the machine operation state such as, FILLING, READY etc. Settings Icon accesses data and maintenance menus. Temperature display window shows wash and final rinse temperatures. Time Remaining area shows the elapsed time for the Rinse, Dwell, and (Recovery cycles VHR only). DH6000... -
Page 16: Cycle Times
Cycle Times • The DH6000T-VHR cycle consists of a wash, rinse, dwell and recovery time. The recovery portion of the cycle removes steam and recycles heat. DH6000 CYCLE OPTION* DH6000 CYCLE TIMES* Dishwasher Cycle Option 1 Approx. 1 minute Wash... - Page 17 Operation Operation Sequence • Push the green power button on. • FILLING is displayed • READY displayed when the machine filled. • Touch SELECT CYCLE button for 1, 2, 4, or 6 minute total cycle. • Insert dish rack of wares and close doors. •...
-
Page 18: Operation Sequence
Operation Operation Sequence (continued) SELECT CYCLE READY Touch to Change WASH TEMP When READY appears, touch the SELECT CYCLE button to choose a cycle. Each touch Scrap and load wares into dish rack. advances the cycle time between 1, 2, 4, Wash one rack at a time and do not and 6 minutes. -
Page 19: Changing Cycle Times
Operation 1 MIN CYCLE READY Touch to Change WASH TEMP The display returns to READY at the end of the 1 MIN CYCLE. Open the doors, and remove the rack of clean wares. Caution: Wares may be hot after washing. Be careful when removing wares. Changing Cycle Times •... -
Page 20: Rinse Sentry
Operation Rinse Sentry • This machine is equipped with a Rinse Sentry Feature that monitors the booster temp- erature during the wash cycle and will extend the wash cycle time until a minimum of 180°F is achieved in the tank. Once achieved, the machine will complete the wash cycle and perform a final rinse. -
Page 21: Cycle Counter
Operation Cycle Counter • This machine is equipped with a cycle counter that records the number of total cycles the machine operates. The counter can be accessed when the machine is idle. The counter can not be reset. • To access the counter: 1 MIN CYCLE READY Touch to Change... -
Page 22: Cleaning
Cleaning Cleaning • Clean the machine at the end of each meal period or after every 2 hours of continuous operation and at the end of the day. CAUTION: Dishwasher surfaces may be hot. Use caution when cleaning the machine. To clean the dishwasher: 1. - Page 23 Cleaning Cleaning WASH SPRAY ARM RINSE SPRAY ARM Fig. 7 Rinse Arm Spindle Paper Clip Plug Wash Spray arm Fig. 8...
- Page 24 Cleaning Cleaning (continued) 8. Clean the float switch. 9. Clean the detergent probe with a non-metallic green Scotch Brite™ scrub pad. 10. Wipe the interior with a soft cloth. 11. Reinstall the scrap screens and spray arms making sure the spray arms spin freely. 12.
-
Page 25: Deliming
Deliming Deliming DELIME WARNING: Consult the chemical representative's recommendations for the use of deliming chemicals. Wear protective clothing, goggles and face shield when handling chemicals. Deliming intervals are determined by the amount of lime build-up in the dishwasher. A pass- word protected delime time interval is adjustable by manager, maintenance or service. - Page 26 Deliming DELIME Deliming (continued) Step 3: "CLEAN SCREENS" picture displayed. • Remove scrap screens. • Clean food soils. • Reinstall screens. Step 4: "CLOSE DOOR TO FILL" displayed. Step 5: Close doors and machine fills. • "FILLING" displayed. Step 6: "ADD DELIME CHEMICAL"...
- Page 27 Deliming Step 7: "CLOSE DOOR TO START" displayed. Step 8: "DELIME IN PROGRESS" • Door latches • Green power button deactivates • Machine washes. • The remaining WASH DELIME time in minutes is displayed on screen. Step 9: "TIME REMAINING" disappears from screen. "DRAINING"...
- Page 28 Deliming DELIME Deliming (continued) Step 10: Machine Fills Step 11: "DELIME RINSE" displayed. • Final rinse water valve opens for the pre-programmed time. • Time remaining displayed on screen. • Valve closes. Step 12: "COMPLETE" displayed. • Deliming operation complete. •...
- Page 29 Deliming Manual Delime Start 1 MIN CYCLE READY Deliming can be started manually without Touch to Change waiting for the scheduled interval. To start: WASH TEMP • Press the main screen 'TOOLS' button. • Press the 'DELIME' button. • Press DELIME START to begin. •...
-
Page 30: Maintenance
Maintenance Maintenance Maintenance Schedules Daily Maintenance • Check the chemical container levels • Make sure the water supply is on and the drain is clear of debris. • Clean the machine. • Check all of the wash arm and rinse arm spray jets and clean as necessary. •... -
Page 31: Troubleshooting Chart
Troubleshooting Chart Troubleshooting Chart Condition Cause Solution Dishwasher will not run. Hood not closed/bad door Close Hood completely. HMI unresponsive. switch. Bad pump/contactor. Check breaker on panel. Power off/overload tripped. Select 1,2,4 or 6 min. cycle. Cycle not selected Low or no water. Main water supply is off. - Page 32 Blank Page This Page Intentionally Left Blank...