Champion DH6000T-VHR Installation Manual page 42

APPENDIX A: Installing DH6000T Corner Splash Shield Kit P/N 901114
8. Using the splash shield as a template, mark and drill two holes in the corner post.
Secure the shield to the post using the 10-32 screws, nuts and washers provided in the kit.
9. Open and close the doors to ensure there is no interference between the doors and shield.
10. Turn the dishwasher power on to fill the dishwasher.
11. The installation is complete.
ATTENTION:
THE CORNER POSTS MAY BE PREDRILLED AND WILL NOT REQUIRE
THE POSTS TO BE DRILLED IN STEP 8.
26
Fig. 7