Program The Chemical Dispensing System - Champion DH6000T-VHR Installation Manual

Installation
DET R /A

Program the Chemical Dispensing System

Use the digital touchscreen display to enter operating settings. Refer to the instructions below
to set the system parameters.
System Prep
Detergent Rinse-aid
1. Place pick-up tubes in full
containers.
Main Settings Screen
NOTE: The Cycle Times, Concentration, Rinse Aid and Sleep settings are PW protected.
The DET PRIME and RA PRIME are free access.
12
OPTIONAL CHAMPION BUILT-IN DETERGENT
AND RINSE-AID DISPENSING SYSTEM
(IF EQUIPPED)
2. Press power button on.
Button will illuminate and
machine will begin to fill.
Password Protected Sleep -- PW = 7777
99
3. Press 'TOOLS' to access
the main settings screen.
LEGEND - Main Settings
I/O Input and Output Screen
TEMPS Temperature monitoring screen
MAINT Maintenance Menu
DETERGENT Detergent & R/A settings
DELIME Forces machine into delime mode
SLEEP Idle time before sleep (PW protected)
MAIN Return to the main operating screen
Press 99 and enter "7777" in keypad to access
setting.
Sets number of hours the machine must sit idle
before washand booster tank heaters turn off
to save energy.
Factory Default: 99 hours.
SELECT CYCLE
READY
Touch to Change
WASH TEMP