Advertisement
IPVK/6296 Series IP videokit
VX IP Wizard
Wizard configuration software for VIDEX IP System
• The devices go into the "maintenance mode" showing the maintenance screen (Fig. 5).
• The wizard shows the devices detected (Fig. 6), the orange rows are outdoor panels while the yellow rows are indoor stations.
• On the device grid list you can edit directly the "Device ID", the "IP Address" and the "Device Description" (Fig. 7). Any change will
be uploaded immediately to the device if you are working in standard mode, otherwise will be uploaded to the devices when you
press the button "Apply Changes to Devices" if you are working in "OFFLINE MODE" (in "OFFLINE MODE" these settings cannot be
changed from the program main window, but only on device configuration window).
• When you operate in "OFFLINE MODE" the header of the "Videx IP Wizard.exe" changes as shown in Fig. 8.
» The software temporarily locks the devices during the detection then automatically releases them.
» It is possible to make changes to the operations of devices while set to "OFFLINE MODE". However, operation changes that
require an on-line connection such as "firmware update" or "connections from device" will not be possible while in this mode.
» Once the required changes are made, you can upload the changes to the devices by pressing the button "Apply Changes To Devices".
As mentioned above, it is strongly recommended to name all devices with a descriptive name.
Fig. 2
Windows Firewall Warning
DEVICE NOT INITIALISED
Please, use Videx IP Wizard
to set the device
Fig. 4
Device not initialised
Fig. 6
Device detected
Fig. 8
OFFLINE MODE operation
IPVK/6296 Series - Installation handbook
Fig. 3
New devices detected
MAINTENANCE MODE
MODEL
NAME
ID
IP
MAC
Press any button to identify this device
on the Videx IP Wizard
Fig. 5
Device in "maintenance mode"
Fig. 7
Editing Device Description
- 32 -
VIDEX 6296
VP__107
107
192.168.20.107
A0 : 3E : 6B : 20 : 09 : FD
66550062-EN - V5.0 - 31/10/19
Advertisement
