Mount The Autoboom Valve; Install The Pressure And Tank Hoses - Raven AutoBoom Installation Manual

Mount the AutoBoom Valve

AutoBoom Valve Mounted to the Mounting Plate
FIGURE 2.
Mount the AutoBoom valve (P/N 063-0131-126) to the valve mounting plate (P/N 107-0171-802) using four
1.
5/16"-18 x 7/8" hex bolts (P/N 311-0052-104) and four 5/16" zinc plated lock washers (P/N 313-1000-019).
AutoBoom Valve Mounted to the Machine
FIGURE 3.
Mount the AutoBoom valve to the top-right section of the machine's center rack using two 2-9/16" W x
2.
3-1/2" L x 3/8" thread U-bolts (P/N 107-0171-616) and four 3/8"-16 zinc flanged lock nuts (P/N 312-1001-
164).

Install the Pressure and Tank Hoses

Manual No. 016-0230-102
WARNING
Hydraulics are under pressure. Care should
always be taken with a system that has been
pressurized. When disconnecting or purging
hydraulic hoses, be aware that the hydraulic
fluid within the machine's system may be
extremely hot and under high pressure.
Hydraulic System
13