Install The Ultraglide Sensors; Boom Sensor Mounting Locations - Raven AutoBoom Installation Manual

Chapter 4

Install the UltraGlide Sensors

Boom Sensor Mounting Locations

Sensor mounting locations may be influenced by the boom configuration. If an object enters the sensor's blind
range unexpectedly, a false echo return to the sensor could occur, causing the boom to drop and the sensor or
boom to be damaged. To ensure optimal operation of the UltraGlide system and to protect the sprayer boom,
the sensors should be mounted on the front side of the boom, 8 - 10" above the lowest hanging part of the
boom.
Illustration of Sensor's Blind Range
FIGURE 6.
Mount the Boom Sensors
Mounted Boom Sensor
FIGURE 7.
36 Case IH Patriot, Model Year 2010 & Newer AutoBoom™ Installation Manual
WARNING
The machine must remain stationary and
switched off, with the booms unfolded and
supported, during installation or maintenance.