Warnings And Safety - Riello Family KIS Series Installer And User Manual

ENGLISH
EN
1

WARNINGS AND SAFETY

b
The boilers manufactured in our factories are checked even in
the smallest details in order to protect users and installers against
possible injury. After working on the product, qualifi ed personnel
must check the electrical wiring, in particular the stripped part of
leads, which must not protrude from the terminal board and avoiding
possible contact with live parts of the leads themselves.
b
This installer and user manual constitutes an integral part of the
product: make sure they are always kept with the appliance, even if it
is transferred to another owner or user, or moved to another heating
system. In the event of loss or damage, please contact your local
Technical Assistance Centre for a new copy.
b
The boiler must only be installed and serviced by qualifi ed personnel,
in accordance with Ministerial Decree 37 of 2008 and UNI 7129-
7131, and as amended.
b
The installer must instruct the user about the operation of the
appliance and about essential safety regulations.
b
This boiler must only be used for the application it was designed for.
The manufacturer accepts no liability within or without the contract
for any damage caused to people, animals and property due to
installation, adjustment and maintenance errors or to improper use.
b
This appliance should not be operated by children younger than 8
years, people with reduced physical, sensory or mental capacities,
or inexperienced people who are not familiar with the product, unless
they are given close supervision or instructions on how to use it safely
and are made aware by a responsible person of the dangers its use
might entail. Children must not play with the appliance. It is the user's
responsibility to clean and maintain the appliance. Children should
never clean or maintain it unless they are given supervision.
b
After removing the packaging, make sure the content is in good
condition and complete. Otherwise, contact the dealer from whom
you purchased the appliance.
b
The safety valve outlet must be connected to a suitable collection
and venting system. The manufacturer declines all liability for any
damage caused due to any intervention carried out in the safety
valve.
b
The seal of the condensate drainage connection line must be secure,
and the line must be fully protected against the risk of freezing (e.g.
by insulating it).
b
Check that the rainwater drainage channel of the fl ue gas exhaust
coupling and the relative connecting pipe are free of obstructions.
b
Dispose of all the packaging materials in the suitable containers at
the corresponding collection centres.
b
Dispose of waste by being careful not to harm human health and
without employing procedures or methods which may damage the
environment.
At the end of its life, the product should be not be disposed
of as solid urban waste, but rather it should be handed over
to a diff erentiated waste collection centre.
During installation, inform the user that:
b
In the event of water leaks, the water supply must be shut off and the
Technical Assistance Centre contacted immediately
b
Periodically check that the operating pressure of the hydraulic system
is comprised between 1 and 1.5 bar. Otherwise contact the Technical
Assistance Service or professionally qualifi ed personnel.
If the boiler is not used for a long period of time, it is recommended to
perform the following operations:
b
Turn the main switch of the appliance and the main switch of the
system to "off "
b
Close the fuel and water taps of the heating and domestic hot water
system
b
Empty the heating and domestic hot water circuits if there is the risk
of freezing
b
Boiler maintenance must be carried out at least once a year. This
should be booked in advance with the Technical Assistance Centre.
Based on D.P.R. 16 April 2013 No. 74 the qualifi ed engineer pursuant
to Ministerial Decree 22 January 2008 No. 37 (installing or servicing
company), must establish the requirements and frequency of the
inspection operations and any system service in order to guarantee
the required safety. If this information is not provided, refer to the
manufacturer's indications.
b
For the assembly, programming and commissioning of the boiler
when used in hybrid systems with a heat pump, storage cylinder and
solar heating circuit refer to the system manual.
For safety reasons, please remember that:
a
Do not access the inside of the boiler. Any work on the boiler should
be carried out by the Technical Assistance Centre or by professionally
a qualifi ed personnel.
It is forbidden to activate electric devices or appliances such as switches,
household appliances and so on if you notice a smell of fuel or unburnt fuel.
In this case: ventilate the room by opening the doors and windows:
- Close the fuel shut-off device;
- ask the Technical Assistance Service or professionally qualifi ed
personnel to intervene promptly..
a
it is forbidden to touch the appliance while barefoot or if parts of your
body are wet.
a
Any technical or cleaning operation is forbidden before disconnecting
the appliance from the main power supply by turning the system's
main switch to "OFF" and the main switch of the boiler to "OFF".
a
Do not modify the safety or adjustment devices without the
manufacturer's authorisation and precise instructions.
a
It is prohibited to pull, detach or twist the electrical cables coming
from the appliance even if it is disconnected from the mains power
supply.
a
Avoid blocking or reducing the size of the air vent openings in
the installation room, do not leave infl ammable containers and
substances in the room where the appliance is installed.
a
Do not leave fl ammable containers and substances in the room
where the device is installed.
a
It is forbidden to disperse the packaging material in the environment
and leave it within children's reach as it may be a potential source
of danger. It must be disposed in accordance with the present law.
a
It is forbidden to obstruct the condensate drain outlet. The condensate
drain pipe should be facing the discharge pipe, preventing the
formation of further drain pipes.
a
Never carry out any work on the gas valve.
ENGLISH
3