Care; Cleaning And Disinfection - BORCAD Medical AVE PPA-AX30 Instruction Manual

4 Care

All BORCAD Medical a.s. products are designed for many years of service
under the condition of correct use. Please use your bed and its accessories with
care.
Please follow these instructions and the herein described operation procedures.
Avoid negligent handling. Do not, in case of function failure, undertake any
repairs and never use force!

4.1 Cleaning and disinfection

 Prior to cleaning always pull the plug of the network cable out of
the socket!
 Do not use any automated cleaning or disinfection methods!
 Get the chair to its highest elevation and position the lying surface
horizontal.
 Do not start motors during the cleaning.
 For the basic leaning use a soft cloth and a mild solution of an alkali
multi-purpose cleaner (soap water). For disinfection we recommend
using standard preparations for disinfection of surfaces based on for
example quaternary ammonia compounds, aldehyde preparations,
peroxy-compounds and preparations containing active chlorine. The
dilution ratio recommended by the preparation producer must always be
followed!
 Do not use any abrasive washing aids or solvents (such as Nitro,
Acetone, etc.).
 By using an inadequate amount of water you risk water leakage into the
motor parts of the product, which may damage the electric wiring and
render the product not functional.
 In case of improperly performed cleaning and disinfection, there is a risk
of nosocomial infection.
 We recommend performing proper cleaning according to hygienic
standards of medical facilities.
 Put the upholstery on dry bed areas only
 When cleaning, place the footrest upholstery on the flat side.
 This medical appliance with all its parts and accessories is not
designed to undergo sterilisation.
BORCAD Medical a.s.
739 45 Fryčovice 673, tel.: +420 558 640 611, fax: +420 558 668 087
52
www.borcadmedical.com