Technical Specification - BORCAD Medical AVE PPA-AX30 Instruction Manual

5.2 Technical specification

Total length of the supporting area (including the leg support)
Minimum length in the default setting (without the leg support)
Height of the supporting area including upholstery (seat):
Leg support (dimensions 734x680)
Leg support - elongated (dimensions 734x760)
Backrest (dimensions 960x950)
Footrest vertical positioning angle
Footrest horizontal positioning angle
Horizontal positioning of the leg support
Stickers, labels – made of a polymeric PVC foil
Permitted backrest load (125 mm from the edge)
Permitted leg support load (125 mm from the edge)
Maximum load of the trapeze bar is
Overall weight of the upper part of the birthing bed including
Overall weight of the lower part of the birthing bed including
Nominal value of the fuse in the control unit (230 V)
Nominal value of the fuse in the control unit (100/120 V)
BORCAD Medical a.s.
739 45 Fryčovice 673, tel.: +420 558 640 611, fax: +420 558 668 087
Total length of the upholstery
Total width
Upholstery width (maximum)
Minimum
Maximum
Vertical lift
Vertical speed
Upholstery thickness:
Seat (dimensions 960x380)
Positioning angles:
Backrest positioning angle
Seat positioning angle
Trendelenburg position
Leg support positioning angle
Elevation setting
Wheel diameter
Max patient load
Safe operation load
Permitted footrest load
Permitted side support load
Overall weight of the product
accessories
accessories
Noise level
2100 mm
1320 mm
2000 mm
1016 mm
960 mm
600 mm
895 mm
295 mm
10 mm/s
50 mm
50 mm
75 mm
75 mm
-12°/+70°
0°/+20°
-12°
-90°/+45°
-16°/+48°
0°-25°
225 mm
0°,60°,90°
125/150 mm
210 kg
245 kg
135 kg
135 kg
50 kg
50 kg
70 kg
210 kg
95 kg
115 kg
Less than 65 dB (A)
T 1,25 AL_250V
2,5 AT
57
www.borcadmedical.com