2.4.10 Handle holders for hands for leg rests
Hand holder for the leg rest may be inserted into the square holder, which is a
part of the leg rests. The holder automatically locks after inserting. Holder may
be removed by pushing the arresting lever in the direction of the arrow and
simultaneous pull of the holder upwards
When simultaneously using hand holders and setting of leg rests to
position of leg supports, collision may occur! Hence it is necessary to pay
attention to avoid injury to personnel and/or the mother in labor when
adjusting the holders.
Cleaning of grab handle girdles
To clean grab handle girdles, you can use a weak solution of soap, alcohol
cleaner or isopropyl alcohol. Do not use abrasive cleaners (such as liquid sand)
and organic solvents not listed above.
BORCAD Medical a.s.
739 45 Fryčovice 673, tel.: +420 558 640 611, fax: +420 558 668 087
40
www.borcadmedical.com