Thanks to the side supports can the woman fix herself during the birth (or
before) and get into the safer and more comfortable position for birth. Side
supports have to be set in holes on the back rest of the bed. Other then correct
setting is not allowed – see pictures below.
Side support must always be sufficiently ensured, otherwise the risk of
falling out of the backrest part, loss of stability of the patient, or capturing
people shake out on the handle side support - see the wrong mounting
side supports.
For dismantling of side supports is necessary to completly remove these side
supports from the bed and put them out or in plastic basket for accessories
PPA-65 if the bed is equipped with this accessory.
Before using, the side-guard function must
be checked to ensure firm attachment.
During regular service inspection, the side guards must be checked
and duly adjusted.
BORCAD Medical a.s.
739 45 Fryčovice 673, tel.: +420 558 640 611, fax: +420 558 668 087
When deploying the side support guard hold the
tube at a sufficient distance from the head restraint
so as not to squeeze your hand.
Proper
mounting
side
supports
51
www.borcadmedical.com