2.4.4 Manual setting of the CPR and Trendelenburg
The CPR controller is marked with red information labels on both sides of
the back section. The labels are marked with CPR. The controllers are not
intended to be used as handles for transporting the bed. During annual
inspections, it is recommended to check the mechanism (removal of
springs and cords, loosening tolerances).
To activate the function, use one hand to push the red lever in the specified
direction. Use your other hand to pull down the back section by the back
handle.
Keep holding the lever during this movement. When the bed reaches horizontal
or Trendelenburg position, release the lever. The bed locks safely in this
position.
BORCAD Medical a.s.
739 45 Fryčovice 673, tel.: +420 558 640 611, fax: +420 558 668 087
30
www.borcadmedical.com