2.4.5 Adjusting the foot section
Inserting/pulling out
Foot section may be in its low position turned along vertical axis and it may be
arrested in three positions:
a) Pushed in (part is completely hidden under the seat)
b) Medium position (turned at 60 angle)
c) pulled out (up to 90from the starting position where it forms a uniform
bed together with seat and back part)
Adjustment to any of these positions can be done after pressing the controller
with an arrow specifying the intended direction of pushing the control element
downwards and turning the foot section towards the operator. After releasing
the control, while turning the foot section, it will be automatically arrested in the
nearest position. If you wish to fluently pull out or push in the foot section
completely, just keep the control pressed.
BORCAD Medical a.s.
739 45 Fryčovice 673, tel.: +420 558 640 611, fax: +420 558 668 087
31
www.borcadmedical.com