Leg Holders (Joint Systém-Ppa-00.10-X) - BORCAD Medical AVE PPA-AX30 Instruction Manual

2.4.8 Leg holders (joint systém-PPA-00.10-X)
Leg holders are two-piece, split and are used complete either as leg holders or
as foot supports, after removing the leg holder bowl you can use it as handrails.
Fixation on the bed:
 Leg holders set into square holes on sides of seat part and secure with
safety screw – see pictures below.
 After removig the leg holder bowl are leg holders as handrails:
 Release the safete screw of leg holder bowl in direction B at least 3
rotations and remove the leg holder bowl in direction C.
 Make sure that leg holders, when are not in use, must be turned
backward – direction E – and also must be secured by rotating lever in
direction D.
 When driving down with the bed must be leg holders in upper
position.
 When are leg holders tilt down can come to the collision with the bed
frame or with the floor!
BORCAD Medical a.s.
739 45 Fryčovice 673, tel.: +420 558 640 611, fax: +420 558 668 087
38
www.borcadmedical.com