2.4.7 Separable leg supports (PPA-00.46.x)
The leg supports are made of two parts, which are used together to ensure leg
support. If you remove the top part, you can still use the handgrips. In this
position the bed is best suitable for boarding.
Removal procedure:
1) Push the safety lock (Fig. 1)
2) Pull the top part of the leg support out of the locking mechanism (Fig. 2)
3) The bottom part remains in the chair in case you wanted to use the handgrips
(Fig. 3)
Fig. 1
Fig. 3
In the interest of easy removal/installation, ensure perpendicular position of the
top part in relation to the bottom part of the leg support as shown in the
following figure.
BORCAD Medical a.s.
739 45 Fryčovice 673, tel.: +420 558 640 611, fax: +420 558 668 087
Fig. 2
36
www.borcadmedical.com