Connecting the backup batteries
1. Lift high plastic cover (A) and remove low plastic cover (B).
2. There are electronical components under the plastic cover. Plug in
connector C into position D (marked as „BAT") in controlbox unit.
3. To plug in the connector into position D in controlbox, it is necessary to lift
the plastic cover of connectors. It is necessary to put the plastic cover into
original position after the connector is plugged in.
BORCAD Medical a.s.
739 45 Fryčovice 673, tel.: +420 558 640 611, fax: +420 558 668 087
12
www.borcadmedical.com