BORCAD Medical AVE PPA-AX30 Instruction Manual page 18

 Portable and mobile HF communication devices should not be used
closer than the recommended distance of d = 15 cm from any part of
the birthing bed, including the cables.
 The birthing bed must be installed and put into operation in compliance with
information related to EMC provided in the accompanying documentation.
Portable and mobile HF communication devices may influence the electrical
medical device.
Manual and declaration of the manufacturer - electromagnetic radiation
The AVE birthing bed is intended for use in electromagnetic environment
specified below. The customer or user of the AVE birthing bed must ensure that
the bed is used in such environment.
High frequency radiation
CISPR 11
High frequency radiation
CISPR 11
Harmonic
emissions
IEC 61000-3-2
Voltage fluctuations/
flicker emissions
IEC 61000-3-3
BORCAD Medical a.s.
739 45 Fryčovice 673, tel.: +420 558 640 611, fax: +420 558 668 087
Group 1 The AVE birthing bed uses high
frequency energy only for its internal
functioning. Therefore, its high
frequency radiation is very low and is
not likely to cause any interference
with nearby electronic equipment.
Class A The AVE birthing bed is intended for
use in all facilities other than
households and buildings which are
Not
directly connected to a public low-
applicable
voltage power supply network that
supplies buildings used for residential
Not
purposes.
applicable
18
www.borcadmedical.com